User Manual

57User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Maintenance
C0NTROL OPERATION
6.10. Maintenance - Serial COMMAND
OP
OP
SCR
DATA
5
6
1 byte - range from 1 to 4, specify the sequence number of the screen packet
OK or Error
DATA
Example
[Screen Type][Number][Video Source Number]
For the DATA, the [ ] cannot omit
Screen type: 0 = main screen, 2 = Left independent screen, 3 = right independent screen
Number: You can find it at the 'Window Attribute' panel.
Video Source Number: According to the Frame number(f), Card number(c),Child card number(s) and Port
number(p) to calculate, please refer to the picture below:
Calculate method : video source number=c*256+p
Replace the video source 259 to Number 1 on the main screen $51[0][1][259]^
Replace the video source 544 to Number 1 on the left independent screen $51[2][1][544]^
Replace the video source 359 to Number 1 on the right independent screen $51[3][1][359]^
Replace the video source 259 to Number 2 on the main screen $52[0][2][259]^
Switch the Video Source - Central Command
Switch the Video Source - Device Response