User Manual

56 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
Maintenance
C0NTROL OPERATION
6.10. Maintenance - Serial COMMAND
• On Quick Menu, click Group Management. And use below code for Serial Command.
OP
OP
OP
OP
SCR
SCR
DATA
DATA
1
3
2
4
1 byte - range from 1 to 4, specify the sequence number of the screen packet
1 byte - range from 1 to 4, specify the sequence number of the screen packet
Multiple plan names separated by spaces (UTF8 format). E.g: Plan 1 Plan 1
OK or Error
DATA
DATA
Example
Example
None
Group Name - UTF8 format
Call the screen group 1 - $11^
Call the screen group 2 - $12^
Call the screen group 3 - $13^
Call the screen group 4 - $14^
Call the screen group 1 - plan 5 : $31plan 5^
Call the screen group 2 - ab : $32ab^
Call the screen group 3 - 123ab : $33123ab ^
Call the screen group 4 - plan6a : $34plan6a ^
Plan 1 : 24 33 31 31 5E
Plan 2 : 24 33 31 32 5E
Plan 3 : 24 33 31 33 5E
Group Management - Central Command
Switch Group - Central Command
Group Management - Device Response
Switch Group - Device Response