Installation Manual

4
3
2a. For Wood Stud Wall Mounting
2b. For Solid Brick and Concrete Mounting
X X
√
2
1
Drill pilot holes
Drill pilot holes
1
2
3
Screw the wall
plate onto
the wall
Screw the wall
plate onto
the wall
X X
√
WARNING
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud
finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
Installers must verify that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
WARNING
ø 4mm
(ø 5/32")
55mm
(2.2")
55mm
2.2"( )
50mm
(2" )
60mm
(2.4")
60mm
2.4"( )
55mm
(2.2")
ø 8mm
(ø 5/16" )
W-A
W-B
Find and mark the
exact location of
mounting holes
Mark the exact
location of
mounting holes
W-A
1. Separating the VESA Plate
Use tool to loosen the bottom
screws in order to separate the
VESA plate from the wall mount.
XX