Installation manual

INSTALLATION MANUAL

LCD Wall Mount

LCD-201

27"

MAX

50x50

75x75

100x100

ISSUED: JUL. 2013

RATED

30kg

(66lbs)

RATED

Secure your display to the mount by tightening screws(just removed).

Maintenance

• Check that the bracket is secure and safe to use at regular intervals(at least every three months).

• Please contact your distributor if you have any questions.

CAU TION: DO NOT EXCEED

RATED LISTED WEIGHT. SERIOUS

INJURY OR PROPERTY DAMAGE

MAY OCCUR!

PAGE 1
INSTALLATION MANUAL LCD Wall Mount CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! Secure your display to the mount by tightening screws(just removed). Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions. LCD-201 50x50 75x75 100x100 27" MAX 30kg (66lbs) RATED ISSUED: JUL.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
PAGE 3
2b. For Solid Brick and Concrete Mounting 1. Separating the VESA Plate 60mm 55mm ((2.2") (2.4") 2.4") ø 8mm (ø 5/16" ) Use tool to loosen the bottom screws in order to separate the VESA plate from the wall mount. Mark the exact location of mounting holes 2a. For Wood Stud Wall Mounting 1 2 55mm 50mm ((2" (2.2") 2.
PAGE 4
3. Installing the VESA Plate TV 4. Installing the Display TV TV M-A M-B M-C Tighten all screws but do not over tighten. 5 Lift the display, aligning holes in the VESA plate with the mount holes in the wall plate.