Installation manual

4
3
1a. For Wood Stud Wall Mounting
1b. For Solid Brick and Concrete Mounting
WARNING
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud
finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
Installers must verify that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
WARNING
ø 4.5mm
(ø 3/16")
55mm
(2.2")
55mm
2.2"( )
30mm
(1.2")
60mm
(2.4")
60mm
2.4"( )
60mm
(2.4")
ø 10mm
(ø 3/8")
W-A
X X
√
1
2
Drill pilot holes
3
Find and mark the exact
location of mounting holes
XX
X X
√
Drill pilot holes
1
2
Mark the exact
location of
mounting holes
Screw the wall
mount onto
the wall
Screw the wall
mount onto
the wall
W-B