INSTALLATION INSTRUCTIONS VZ-WM60 Universal Low Profile Flat Mount for 40” to 55” ViewZ Monitors NORTH AMERICA 177 W. Orangethorpe Ave.
VZ-WM60 Contents Weight Limit............................................................................................................................................................... 2 Warning Statements.................................................................................................................................................. 2 Installation Tools......................................................................................................................................
VZ-WM60 Parts List Congratulations on the purchase of your new ViewZ VZ-WM60 flat panel mount. This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact ViewZ (888) 99-ViewZ.
VZ-WM60 Hardware Pack Mounting Screws M4 x 30mm (Qty 6) M5 x 30mm (Qty 6) M4 x 25mm (Qty 6) M5 x 25mm (Qty 6) M4 x 16mm (Qty 6) M5 x 16mm (Qty 6) M6 x 45mm (Qty 6) M8 x 70mm (Qty 4) M6 x 30mm (Qty 6) M6 x 25mm (Qty 6) M8 x 45mm (Qty 6) M6 x 16mm (Qty 6) M8 x 30mm (Qty 6) M8 x 25mm (Qty 6) M8 x 16mm (Qty 6) If your unit requires alternative mounting hardware, use commercially available hardware or contact ViewZ (888) 99-ViewZ. Page 4 Visit the ViewZ website at http://www.viewzusa.
VZ-WM60 Cable/Electrical Cut Out Large cut outs on the wall plate allow for easy cable access and power distribution. Visual Centering DiamondThis will help in determining the exact center of your flat panel on the wall. Features Low Profile Design Holds the flat panel less than 1” from the wall. Universal Spacers Uniquely designed spacers that fit multiple screw sizes. Mounting Slots Allow for a variety of stud configurations and lateral shift adjustments when mounting your flat panel.
VZ-WM60 Wood Stud Installation Visual Centering Diamond - The visual centering diamond will guide you in determing the screen placement on the wall. It is recommended that two people perform the installation. One person should hold the mount while the other person installs the wall plate. Stud Electronic Studfinder 1/4” Drill Bit Step 1. The visual centering diamond will help you visualize the center of your flat panel.
VZ-WM60 Level Step 6. With the help of an assistant, place a level on the center of the mounting rail and level the mount. Mark and drill the second mounting hole. Step 7. Insert one (1) 5/16” x 3” lag bolt and washer into the mounting hole and tighten (see WARNING: Page 4). Repeat for the remaining mounting points. Do NOT overtighten lag bolts when attaching the mount to the wall. Improper installation may result in personal injury or damage to property.
VZ-WM60 So lid Su rfa ce Ci nd er Blo ck Threaded Shaft Mounting Hardware Wall Plate Socket Wrench Step 6. Once all of the anchors are in place, move the wall plate back into position. Step 7. Attach nuts and washers to the threaded shafts that are protruding from the wall. Level the mountonemoretimeandthentightenthenuts. Do not overtighten the wedge anchors. Determining the Mounting Hardware Step 1. Step 2. Step 3. Step 4. Step 5.
VZ-WM60 Universal Spacers Installation You may not need to use any spacers for your particular flat panel. The universal spacer may be stacked six (6) high, for a total stacking height of 1-1/2”. The universal spacers must be stacked in the direction shown above. The universal spacers must be placed between the mounting bracket and the flat panel. The universal spacer can fit M4, M5, M6 and M8 screws sizes.
VZ-WM60 Mounting Bracket Installation To ensure optimal installation, this kit includes various screws of different diameters and lengths. The number of mounting points will vary between manufacturers. Select the spacer that is closest in depth to the recess to keep your bracket as close to the flat panel as possible. Do NOT overtighten the screws. Mounting Hardware Universal Washer Universal Spacer Mounting Bracket Mounting Point Flat Panel Step 1.
VZ-WM60 Fixed 5° Tilt Bracket Installation (Optional) The fixed tilt brackets allow for a fixed forward 5° tilt. Please read the following installation instructions to attach the fixed tilt brackets. M6 x 8mm Screw Step 1. Pre-install two (2) M4 x 6mm screws to the fixed tilt bracket. Step 2. Slide the tilt bracket through the Mounting Bracket open slots of the upper mounting bracketslotandalignthemounting holes. Step 3.
LPFM3752 VZ-WM60 Security Safety Bar Installation Do not release the flat panel until the top and bottom hooks of the arms are resting fully on the upper and lower mounting rails. The safety bar may be mounted from either side of the flat panel. Wall Plate Flat Panel Mounting Bracket Security Bar Step 1. Slide the security bar between the lower mounting rail and the bottom of the wall plate. Technical Specifications All measurements are in inches [mm]. Page 12 Visit the ViewZ website at http://www.
VZ-WM60 Warranty VIEWZ LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Viewz warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What ViewZ Will Do At the sole option of ViewZ, ViewZ will repair or replace any product or product part that is defective.
