Operating Instruction Manual LCD/LED MONITOR DSMH21.5LED-WGF DSMH23.6WGF DSMH26LED-WGF DSMH32LED-WGF DSMH42LED-WGF DSMH46LTFT DSMH54.6TFT DSMH64.
Explanation of Connectors ------------------------------------------------------ 4~6 Connection under various signal input mode （Ⅰ） Connecting with computer VGA------------------------------------------------------- 5 （Ⅱ） Connecting the Device with Video (Basic)------------------------------------------ 6 （Ⅲ） HDMI connection-------------------------------------------------------------------------- 7 Connecting the Monitor Cables to your Computer-------------------------------7 Testing the Monitor---------
DANGER: To avoid the risk of fire and/or explosion which will result in serious injury or death: Do not install or use this product in a hazardous location. WARNING: To avoid the risk of fire which could result in serious injury or death: Do not remove the cover or back of the monitor. CAUTION: To avoid the risk of electric shock which could result in serious injury or death: •This device must be operated with the original power supply, •Do not use a damaged power supply.
Installation 1. Rear Interface (a) External power supply (b) Built-in power supply VIDEO OUTPUT (BNC1/BNC2 OUT) Connect a VCR or DVD-recorder to record digital and analog programs from the ANTENNA CABLE INPUT (excluding copy-protected programs and component video formats) while the MONITOR is turned on. You must leave the MONITOR on the same channel you are recording. AUDIO IN (Stereo mini jack) Use to obtain sound when a PC is connected to the VGA jack. Use a 3.
Connect your yellow video cable( video in). Connect a video cable to the BNC1 or BNC2 INPUT jack on the back of the monitor and to the Video Output jack on the DVD player or a camera. Connect your red and white audio cables. Connect the audio (red and white) cables to the AUDIO INPUT R and L jacks on the back of the monitor and to the Audio Output jacks on the DVD player. Viewing the Picture from the Connected Device 1.Plug in the monitor and the device, if they aren't already plugged in. 2.
Power Turn On & off the monitor Power-s Back light : high, mid , low (If available) Scale : full, 16:9 or 4:3 Sensor Available only built-in camera Freeze Still : on & off Mute Switches the sound on or off Lock Menu lock: lock, unlock 、 Menu VGA Move Up / down highlight icon, Display the main on-screen menu Press them to turn up or turn dowm the volume Auto adjust (available only VGA mode) Press it to display information on the monitor screen VGA signal HDMI HDMI signal < 、> Auto INFO AV i
Choose the input source If you hope to enjoy the picture from the external input source ,before to select the source ,you need to connect the devices, otherwise, when you select the source ,the none or no signal will appears on the screen, Press source button on the monitor or remote control, the menu appears on the screen ,then press source to select the monitor item, and press“ +/- (>)” to ensure it VGA: the input source from VGA terminal output HDMI: the input source from HDMI in terminal output AV1/2:th
SOUND equalizer Equalizer The five-band graphic equalizer lets you adjust the audio frequency settings. You can select one of the five-band Equalizer Presets or create your own personal preset (see picture equalizer). Language Lets you select your preferred language for the menus: (English. Chinese. German. French. Spanish. Portuguese. Russian. Italian) OSD H-POSITION: H-position moves the OSD position left (0-50) or pressing the “> “ button.
H-POSITION ： Moves image horizontally on screen either left (<) or right (＞). V-POSITION ：Moves images vertically on screen either up (<) or down (＞). CLOCK：If the clock setting of your image is not fine-tuned, you may observe periodic vertical bars of video noise on your image. These bars of noise are usually adjusted out when an Auto Configuration is performed. If the bars of noise are still present, this setting can be adjust manually.
SOUND Language Lets you select your preferred language for the menus: English. Chinese. German. French. Spanish. Portuguese. Russian. Italian OSD H-POSITION: H-position moves the OSD position left (0-50) or press the “> “ button. H-position moves the OSD position right (51-100) OSD V-POSITION: Adjust the OSD image vertically by pressing the “< or > “ button. V-position moves the OSD position up or down.
MULITI WINDOW: OFF.PIP. POP The default value is off, Lets you select your window for the picture: PIP . POP Care and Cleaning CAUTION: Turn off your MONITOR before cleaning. You can clean the MONITOR as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The MONITOR’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen.
