Instruction manual

SOURCE ME N U + -
POWER
1.POWER Turn on / off the monitor
2.SOURCE: Accesses the available video input signals (VGA、HDMI
AV1、AV2 、S-VIDEO)
3.MENU： Brings up the MONITOR Main menu. When in the OSD
system, press MENU button to return to the previous menu or exit
4.＋: turn on the volume. In the MONITOR menu system, acts like the
right arrow button on the remote control and adjusts menu controls.
5.－ :turn down the volume. In the MONITOR menu system, acts like
the left arrow button on the remote control and adjusts menu controls.
6. Remote control signal receiver window
7. Remote indicator: In red when standby mode, in blue when display.
HOW to use buttons
Use the buttons on the right side control panel to adjust the OSD
（1）Power on the LCD monitor.
(2) press source button to accesses the available video input signals，
press ＋ or — button to enter the video mode
(3) press MENU button then press ＋／－ button move highlight icon left
/ right
(4) Press SOURCE button to enter the submenu，then press ＋／－
button corresponding to edit,
(5) When you are satisfied with the setting ,press MENU button to return
to the previous menu or exit
Ⅱ、Remote control
* Ensure the remote control is pointed toward the remote control window on
the display. No obstacles should be placed between the remote control and
the remote control window. The effective receiving scope for the signal is 3
meters to the front of the remote control window,
1. To ensure a normal operation, the remote control should not be dropped
or damaged in any way .It should also be kept dry
and away from all heat sources.
2. Battery replacement is necessary when the
remote controller acts inconsistently or stops
operating the LCD display.
Power
Turn On & off the monitor
Power-s
Back light : high, mid , low (If available)
Scale : full, 16:9 or 4:3
Sensor
Available only built-in camera
Freeze
Still : on & off
Mute
Switches the sound on or off
Lock
Menu lock: lock, unlock
 、
Move Up / down highlight icon,
Menu
Display the main on-screen menu
< 、>
Press them to turn up or turn dowm
the volume
Auto
Auto adjust (available only VGA
mode)
INFO
Press it to display information on the
monitor screen
VGA
VGA signal
HDMI
HDMI signal
AV
AV input signal
PIP
picture in picture
Source
Press it to display and select the
available video signal
POP
Picture on picture
0~9
password entered and media player
SWAP
POP & PIP function
EXIT
Press this button to exit the menu
7
8