Instruction manual

Choose the input source

If you hope to enjoy the picture from the external input source ,before to

select the source ,you need to connect the devices, otherwise, when you

select the source ,the none or no signal will appears on the screen, Press

source button on the monitor or remote control, the menu appears on the

screen ,then press source to select the monitor item, and press“ +/- (>)” to

ensure it

VGA: the input source from VGA terminal output

HDMI: the input source from HDMI in terminal output

AV1/2:the input source from AV or video camera terminal output

SVIDEO: the input source from S-Video terminal output

OSD setup

1. OSD setup under VGA input mode

Picture

Remark

Brightness: Adjusts the brightness of

the picture.

Contrast Adjusts the difference

between the light and dark areas of

the picture.

Color temp: press“ >”button

Change the color intensity of the

temperature Selected (Normal. warm.

cool. s-RGB. user)

Scale: normal. center

Auto: (auto-adjust) press“> “button

Performs automatic configuration of

the Phase, Clock, vertical and

horizontal position.

Picture mode: press  or  button to

select picture mode, then press the <

or > buttons to select the correct color

system ,in general ,you can see it as

“ USER”. Press < or > button to select

“ standard, dynamic. Soft and user” .