LCD & LED MONITORS User manual DS15LED,DSMH15LED-WGF, DS17TFT, DS19TFT, DSM15WGF, DSM17WGF, DSM19WGF DSM17LED-WGF,DSM19LED-WGF DS17LED, DS19LED, DSM17HT,DSM19HT DSM17HT-LED, DSM19HT-LED,
IMPORTANT SAFETY INFORMATION 1. ENVIRONMENT Table of contents • Important safety information In The Box Connections Rear interface Control Layout How to connect your monitor On-Screen Display (OSD) Operation AV Input Configuration HDMI Input Configuration VGA Input Configuration Specification 2 4 4 4 5 5 7 8 10 13 16 • • Do not install the monitor outdoors or in any hostile environment. To prevent fire or electric shock, do not expose monitor to rain or moisture.
Always place the monitor on a secure table or have it properly mounted to the wall. Do not hang anything on the monitor. • Ensure the monitor is located close to a power outlet that is easily accessible, as removing the power cord is the only way to isolate power USING A WALL MOUNT • • • 2. Caution: Any wall mount must bear a minimum of 5x the monitor’s net weight to mount safely. The stand must be removed first before mounting this way. 1.
If audio input is required, connect the audio (red and white) cables to the AUDIO INPUT R and L connectors on the rear of the monitor and to the Audio Output connector on the DVR/Camera etc. Connect power to the monitor and video source, and switch on. Using the SOURCE button, press repeatedly until either ‘AV1’ or ‘AV2’ (depending on the connection used) is highlighted on the display at the top of the monitor's screen, and press ‘+’ to select.
BASIC ON-SCREEN DISPLAY SETUP 6. 1. To access the OSD Menu, press ‘MENU’. AV - Input Configuration 7. 1. Picture 2. Use the ‘＋’ or ‘－’ buttons to select the required menu item, then press the ‘SOURCE’ button to select the Sub menu. 3. Continue to use the ‘SOURCE’ button to highlight the required field, then press ‘＋’ or ‘－’ to adjust the setting. 4. Press the ‘MENU’ button to return to the previous menu. 5. Press the ‘MENU’ button again to exit the OSD Menu completely.
LANGUAGE: Select preferred language for OSD. (En/Ch/Ger/Fr/Sp/It/Pt/Pl/Ru) (0-100) Set the horizontal position of the OSD. (0-100) Set the vertical position of the OSD. (5-60) Set seconds for the OSD to automatically close. (0-100) Set the colour level of the OSD menu itself Set power level in use by backlight (HIGH/MID/LOW) Restore all factory defaults.
Greyed out options only available in AV Mode 2. OSD 4. Audio 10. LANGUAGE: H-POSITION: V-POSITION: DURATION: HALFTONE: BACKLIGHT: MEM-RECALL: 3. Select preferred language for OSD. (En/Ch/Ger/Fr/Sp/It/Pt/Pl/Ru) (0-100) Set the horizontal position of the OSD. (0-100) Set the vertical position of the OSD. (5-60) Set seconds for the OSD to automatically close. (0-100) Set the colour level of the OSD menu itself Set power level in use by backlight (HIGH/MID/LOW) Restore all factory defaults.
VGA - Input Configuration 1. 12. Picture CONTRAST: BRIGHTNESS: COLOR TEMP: 13. 2. (0–100) Set the difference between the light and dark areas of the picture. (0–100) Set how bright the display is. Select the color temperature Menu. LANGUAGE: H-POSITION: V-POSITION: DURATION: HALFTONE: BACKLIGHT: MEM-RECALL: 3. COLOR TEMP: USER - R: USER - G: USER - B: Select color temperature preset. Set RED color level. Set GREEN color level. Set BLUE color level. OSD Function Select preferred language for OSD.
SLEEP TIMER: Set the monitor to turn off after a given amount of time. (OFF/15/30/45/60 minutes) ON/OFF DLC: Greyed out options only available in AV Mode BASS: TREBLE: BALANCE: SOUND MODE: AVC: 4. PHASE: AUTO ADJUST: 5. Specification Geometry H-POSITION: V-POSITION: CLOCK: Audio (0-100) (0-100) (-50 to +50) Set user or preset audio configurations. (User/Standard/Movie/Music) (ON/OFF) Automatic Volume Control 15. Set horizontal image position. Set vertical image position.
