User manual

SLEEP TIMER: Set the monitor to turn off after a given amount of time.
(OFF/15/30/45/60 minutes)
DLC: ON/OFF
Greyed out options only available in AV Mode
4. Geometry
H-POSITION: Set horizontal image position.
V-POSITION: Set vertical image position.
CLOCK: Manually adjust clock synchronisation.
(If the clock setting of your image is not fine-tuned, you
may observe periodic vertical bars of video noise on
your image. These bars of noise are usually adjusted
out when an Auto Configuration is performed. If the
bars of noise are still present, this setting can be used
to remove them.
PHASE: If the phase of your monitor is not fine-tuned, you may
observe the image being unstable in the horizontal axis.
Use this option to manually correct.
AUTO ADJUST: Perform an automatic configuration of the Phase, Clock,
vertical and horizontal position.
5. Audio
BASS: (0-100)
TREBLE: (0-100)
BALANCE: (-50 to +50)
SOUND MODE: Set user or preset audio configurations.
(User/Standard/Movie/Music)
AVC: (ON/OFF) Automatic Volume Control
Specification
16.
15.