Technical information

V1.0 Vig625M Motherboard Manual
16
Table 2: Motherboard Connection
A
Parallel Connector (Header)
O
USB header
B
ATX 4-Pin12V Power Connector
P
USB header
C
System Fan 2 (Rear)
Q
S/PDIF-Out Connector
D
OC Switch
R
Floppy Disk Drive Connector
E
LGA 775 CPU Socket
S
Front Panel Audio Connector
F
CPU Fan Connector
T
CD-In Connector
G
System Fan 2 (Front)
U
PCI Slot 32-bit
H
Memory DIMM Slots (DDR3)
V
PCI Express x1 Slot
I
ATX 24-Pin Power Connector
W
PCI Express x16 Slot
J
IDE Connector
X
Chassis Intrusion Connector
K
Clear CMOS Jumper
Y
Serial Port Connector
L
Serial ATA Connectors
Z
TPM Module connector
M
Front Panel Connector 1
(Compliant with Intel Front Panel
I/O Connectivity Design Guide)
AA
Rear I/O Connectors
N
Front Panel Connector 2
Overview of System Board Components
A – Parallel Connector
This is used to connect parallel port ribbon cables, which allows parallel port devices to
connect to the system from the rear of the chassis.
B – ATX 12V Power Connector
This 12V power connector is used to provide power to the CPU
C - System Fan2
This is used to keep the Motherboard components and other components cool.
D - OC Switch
This allows you to overclock the Front Side Bus (FSB) to increase processor frequency
E – LGA775 pin CPU socket
CPU sits in the LGA775 pin socket.
F – CPU Fan Header
Fan header dedicated purely for the Heatsink to cool the CPU.
G – System Fan 2 header (Front)
This is used to keep the Motherboard components and other components cool.
H – 2 x DIMM Slots
Insert Memory modules DDR3 800/1066/1333MHz (OC).
I – ATX 24 pin Power Connector
This is the main power connector for the motherboard.
J – IDE Connector
This can be used to connect an IDE Hard Disk Drive or even a CD-ROM drive.