Installation Guide

3
This product meets the CEC requirements. It is up to the discretion of the client to modify the product with the
provided restrictor. Doing so will remove the ability for the product to meet certain low flow standards. Please talk to
your local or statewide plumbing enforcement agency prior to modifying. Vigo is not responsible for any alterations
and the affects that may come with altering the product post sale and highly advises that the client only install the
product that meets the needs of their local plumbing code.
Flow rate with installed restrictor - 1.2 gpm
Flow rate with restrictor provided in box - 1.5 gpm
FLOW RATE REGULATIONS
Twist open the spout counterclockwise to remove the
restrictor. You will find a tube at the end of the spout.
Simply remove the 1.2 gpm restrictor tube and replace it
with the 1.5 gpm restrictor tube provided. Replace the
spout by twisting it back on clockwise and install the faucet
as usual.
SpoutTwist 1.2 gpm restrictor tube off
Spout
Twist 1.5 gpm restrictor tube on