MODEL VG08004 CONTENT PACKING LIST / TOOLS NEEDED PANEL DIMENSIONS FITTINGS / TECHNICAL DATA WALL / CORNER INSTALLATION CLEANING / TROUBLE SHOOTING WARRANTY 1
PACKING LIST DESCRIPTION - PANEL HOUSING - HEAD SHOWER - HAND SHOWER - HAND SHOWER HOSE - HAND SHOWER MOUNTING BRACKET - CORNER BRACKET - 2pc - SCREWS - 4 pc. - FIXING PLUGS - 4 pc. - FLEXIBLE HOSES 16" LONG WITH 1/2" FEMALE CONNECTION FOR HOT & COLD WATER SUPPLY - METAL WASHERS - 4 pc.
PANEL DIMENSIONS 11 1/4" 10 5/8" BRACKET LOCATION 67 1/2" 59 3/4" 26 1/2" 15" 7 3/8" 18 5/8" 68" FLEXIBLE HOSES. CONNECT TO COLD & HOT WATER BRACKET 10 5/8" CORNER INSTALLATION (TOP VIEW) NOTE: Dimension may vary up to 1/4". It is highly recommended to pull all dimensions off actual model for installation and measuring purposes.
FITTINGS/TECHNICAL DATA OVERHEAD SHOWER - 84009 22 1/4" HAND SHOWER - 84004 MIRROR - 87000 4 FUNCTION SWITCH: - HEAD SHOWER - HAND SHOWER - JETS - SPOUT WATER TEMPERATURE DISPLAY - 84012 37" ALUMINUM PROFILE - 88059 MOUNTING BRACKET VOLUME CONTROL - 84016 WATER TEMPERATURE CONTROL - 84017, 84019 (SCALD GUARD LOCATED UNDER HANDLE) WATER HOSE CONNECTION BODYSHOWER (WATER JET) - 84011 SHOWER HOSE - 88004 FRONT VIEW SPOUT 88033 FLEXIBLE HOSES.
FLOW RATE REGULATIONS This product meets the CEC requirements. It is up to the discretion of the client to modify the product with the provided restrictor. Doing so will remove the ability for the product to meet certain low flow standards. Please talk to your local or statewide plumbing enforcement agency prior to modifying.
WALL INSTALLATION 88093 84004 CORNER INSTALLATION 84000 84021 88005 88009 FLAT WALL INSTALLATION BRACKET COMES MOUNTED TO BACK OF UNIT CORNER INSTALLATION Save time and frustration: if turning the volume/temperature control handle gives both hot and cold water, but the water does not mix, the hoses may have been connected to the incorrect supplies. Please disconnect the hoses, reattach them to the correct supplies and test the unit.
CORNER INSTALLATION 84001 84009 84004 84001 88093 84044 MODEL VG08004 7
Cleaning Recommendation for Vigo Products Modern sanitary tapware, kitchen mixers and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning.
SHOWER PANEL LIMITED LIFETIME WARRANTY EFFECTIVE JANUARY 1, 2010 original owner or end-user for personal household use. For commercial uses, additional limitations apply.
CONTENU DIMENSIONS DU PANNEAU INSTALLATION MURALE ET EN ANGLE GARANTIE 1
LISTE DES ARTICLES DESCRIPTION - CORPS DU PANNEAU POMME DE DOUCHE DOUCHETTE TUYAU DE DOUCHETTE SUPPORT DE FIXATION DE DOUCHETTE SUPPORT EN ANGLE - 2 pcs VIS - 4 pcs. CHEVILLES DE FIXATION - 4 pcs. FLEXIBLES 16'' DE LONG AVEC RACCORD 88059 84009 84004 88004 84021 88093 88009 84000 88005 84021 - PORTE-SAVON - CARTOUCHE THERMOSTATIQUE - CARTOUCHE DU VOLUME - BEC - - VAPEUR THERMOSTAT CACHE DU THERMOSTAT AVANT EN PLASTIQUE BRAS RACCORD DE BRAS JETS CORPORELS MIROIR THERMOSTAT - 2.
DIMENSIONS DU PANNEAU 11 1/4" 10 5/8" EMPLACEMENT DU SUPPORT 7 3/8" 18 5/8" 68" FROIDE 67 1/2" CHAUDE ET 59 3/4" 15" 26 1/2" FLEXIBLES.
POMME DE DOUCHE - 84009 22 1/4" DOUCHETTTE - 84004 MIROIR - 87000 - 37" PROFIL EN ALUMINIUM - 88059 POMME DE DOUCHE DOUCHETTE JETS JET SUPPORT DE FIXATION L'EAU - 84012 VOLUME - 84016, 84019 TUYAU DE DOUCHETTE 88004 VUE DE FACE JET 88033 VUE DE DESSUS DU JET D'EAU ROTATION DES JETS DANS TOUTES LES DIRECTIONS DEPUIS L'AXE CENTRAL SUPPORT DE FIXATION TUYAUX SOUPLES BRANCHEZ SUR 14 1/8" FROIDE DU TUYAU D'EAU DOUCHE CORPORELLE (JET D'EAU) - 84011 D'EAU FROIDE - 88005 VUE JET D'EAU LA PRESSIO
de modifier. Vigo est pas responsable des modifications et de la touche qui peut venir avec la modification du poste de vente de produits et conseille que le Etranglement 1 2 2.0 gpm Vous trouverez ici le restricteur. Twist ouvrir Retirez le restricteur 2.0 gpm. antihoraire pour retirer le limiteur. 3 4 2.5 gpm Une fois que le limiteur 2.0 gpm CEC restricteur 2.5 gpm non (fourni). sens horaire.
INSTALLATION MURALE 88093 84004 INSTALLATION 84000 84021 88005 88009 INSTALLATION SUR UN MUR PLAT LE SUPPORT SE INSTALLATION 6
INSTALLATION EN ANGLE 84001 84009 84004 84001 88093 84044 7
Conseils de nettoyage des produits Vigo Produits de nettoyage des mitigeurs et des douches Consignes de nettoyage des mitigeurs et des douches Important Rincez le conduit Rincez ou remplacez la douchette Remplacez la cartouche thermostatique (eau chaude ou eau froide seulement Remplacez la cartouche thermostatique Resserrez ou remplacez les tuyaux d'alimentation (eau chaude ou eau froide seulement) www.vigoindustries.
VIGO INDUSTRIES, LLC ('VIGO') utilisateur final en vue d'un usage personnel domestique. D'autres limitations s'appliquent en cas d'usage commercial. l'entrepreneur ou le constructeur. Limitations blessures, voire la mort. Limitations commerciales Service de garantie proposition par le client met fin aux obligations de VIGO au titre de la garantie.
MODELO VG08004 CONTENIDO CONTENIDOS DEL PAQUETE/HERRAMIENTAS NECESARIAS DIMENSIONES DEL PANEL 1
CONTENIDOS DEL PAQUETE - CAJA DEL PANEL CABEZA DE DUCHA DUCHA DE MANO MANGUERA DE DUCHA DE MANO SOPORTE DE DUCHA DE MANO SOPORTE DE ESQUINA - 2 piezas TORNILLOS - 4 piezas - MANGUERAS FLEXIBLES DE 16" DE LARGO CON 88059 84009 84004 88004 84021 88093 88009 84000 88005 84021 84004 84009 88092 84044 84001 84010 - ARANDELAS DE METAL - 4 piezas - ARANDELAS AZULES - 2 PIEZAS - MAMPARA NEGRA - 2 PIEZAS OTRAS PIEZAS - CARTUCHO DE CONTROL DEL VOLUMEN CONECTOR DE MANGUERA DE ATOMIZADOR BOCA PARA LLENAR LA TIN
DIMENSIONES DEL PANEL 11 1/4" 67 1/2" 7 3/8" 18 5/8" 68" CALIENTE 59 3/4" 15" 26 1/2" MANGUERAS FLEXIBLES. 10 5/8" SOPORTE 10 5/8" (VISTA SUPERIOR) todas las dimensiones del modelo real.
CABEZA DE DUCHA - 84009 22 1/4" DUCHA DE MANO - 84004 ESPEJO - 87000 INTERRUPTOR DE CUATRO FUNCIONES: - CABEZA DE DUCHA - DUCHA DE MANO - CHORROS - BOCA PANTALLA DE TEMPERATURA DEL AGUA 84012 37" PERFIL DE ALUMINIO - 88059 SOPORTE CONTROL DEL VOLUMEN - 84016, 84019 CONTROL DE TEMPERATURA DEL AGUA - 84017, 84019 DE LA LLAVE) MANGUERA DE AGUA DUCHA PARA EL CUERPO (CHORROS DE AGUA) - 84011 SOPORTE 14 1/8" MANGUERA DE DUCHA - 88004 MANGUERAS FLEXIBLES.
NORMAS DE CAUDAL La velocidad de flujo con limitador instalada - 2.0 gpm Caudal con limitador dispuesto en el cuadro - 2.5 gpm Restrictor 1 2 2.0 gpm Va a encontrar el restrictor Retire el limitador de 2.0 gpm. en sentido antihorario para quitar el limitador. 3 4 2.5 gpm Una vez que se elimina el limitador de 2.0 gpm, sustituirlo por el restrictor compatible 2,5 gpm CCA no (siempre). MODELO VG08004 Vuelva a colocar la tuerca horario.
88093 84004 SOPORTE 84000 84021 88005 88009 EN PARED PLANA EL APOYO VIENE MONTADO EN LA PARTE TRASERA DE LA UNIDAD EN ESQUINA correctas y probar la unidad.
84001 84009 84004 84001 88093 84044 MODELO VG08004 7
Material de limpieza para mezcladores y duchas siguientes puntos cuando limpie mezcladores y duchas: - Nunca mezcle materiales de limpieza. Instrucciones de limpieza para mezcladores y duchas Importante el nivel de agua es insuficiente manguera flexible enjuague la manguera enjuague la ducha de mano o la ducha de mano no tira suficiente agua no es posible regular la temperatura PSI o GMP inadecuados no es posible regular la temperatura reajuste o cambie las mangueras techmail@vigoindustries.
VIGO INDUSTRIES, LLC ("VIGO") toda la vida del propietario o usuario final originales. personas. Limitaciones aplicables sobre dichas instalaciones. incluidos, entre otros, productos de vidrio (es decir, puertas de duchas y lavabos de vidrio) por parte de personas sin experiencia puede provocar ruptura del vidrio y, por ende, lesiones personales o la muerte. por el Producto.