Manual

ManualsBrandsVigo ManualsFor HomeVG0901K

DIMENSIONS

VANITY SPECIFICATIONS

VANITY COMPONENTS

Model VG09011K

MODEL # VANITY VANITY VANITY

WIDTH HEIGHT DEPTH

VG09011K 18 1/2" 25 1/2" 20 3/8"

MODEL VG09011K

FEATURES











PACKING LIST

Vanity Assembly













Mirror





Sink



FLOOR

18 1/2"

25 1/2"

FLOOR

20 3/8"

TOLL FREE: (866) 591 - 7792

E-Mail: techmail@vigoindustries.com

www.vigoindustries.com

For warranty purposes contact our toll free number:

15 3/4"

35 1/2"

Summary of content (7 pages)

PAGE 1
VANITY SPECIFICATIONS VANITY COMPONENTS Model VG09011K MODEL VG09011K FEATURES PACKING LIST Vanity Assembly Mirror Sink DIMENSIONS MODEL # VANITY WIDTH 18 1/2" VG09011K VANITY HEIGHT 25 1/2" VANITY DEPTH 20 3/8" 15 3/4" 8" 35 1/2" For warranty purposes contact our toll free number: TOLL FREE: (866) 591 - 7792 E-Mail: techmail@vigoindustries.com 20 3/8" 18 1/2" 25 1/2" www.vigoindustries.
PAGE 2
DIMENSIONS 6 1/8" 8" 3 1/8" 6 1/8" LIGHT FRONT VIEW LIGHT BOTTOM VIEW 15 3/4" 6 1/8" 13 1/4" 2 3/4" 8" STAND FRONT VIEW 35 1/2" 13 1/4" STAND TOP VIEW 13 1/4" 14 3/4" 19" 18 1/4" FLOOR FRONT VIEW 14 1/2" 3 7/8" 5 3/8" 11 7/8" 2" 18 1/8" 16 1/2" 25 1/2" 20 3/8" 18 1/2" 13 1/4" 14 3/4" 10 3/4" FLOOR FLOOR SIDE VIEW BACK VIEW MODEL VG09011K THE MEASUREMENTS IN INCHES ARE ROUNDED TO THE NEAREST 1/8" 2
PAGE 3
2" ROUGHING-IN Should be at the same height as the center of the 2"x6" Backing Material ADJUSTABLE 14 1/2" 11 7/8" 3 7/8" 16 1/2" Open space for Rough-In Plumbing FLOOR BACK VIEW NOTE: Vigo reserves the right to change or alter their products or warranty. Vigo recommends using the physical attributes and dimensions of the actual product and not the installation instructions when preparing the site for your roughing-in.
PAGE 4
PREPARE SITE NOTE: This is the recommended installation for wall mount and freestanding vanities. NOTE: To properly secure the vanity, the center of the required 2x6 backing material must be the correct height from the floor. This will be your desired height. OPTION A FRONT-NOTCH ADJUSTABLE BASED OFF DESIRED HEIGHT Measure and mark your desired height up from the floor. Make sure to remove the distance of the top of the vanity without the sink to the center on the 2 mounting vanity brackets, 2".
PAGE 5
ASSEMBLY PACKAGE CONTENTS 1. Once the product has been unpacked your first step will be to assemble the unit. Select the vanity location and mark holes on the vanity for wall brackets. Remove brackets, drill holes, sink anchors and screw the brackets to the wall. This should be drilled into your 2"x6" backing material. COVER - 1PC. 1 VANITY Holes for the mounting screws MIRROR PLASTIC ANCHOR - 6PC. SCREW - 6PC. STAND VANITY BRACKETS 2PC. PLASTIC ANCHOR - 2PC. HANDLE FOR THE DRAWER SCREW 2PC. 3.
PAGE 6
OPTIONAL: STEP 2 OF INSTALLATION INSTRUCTIONS When installing your faucet it is highly recommended to remove the top drawer. This will allow you to have access to the hollow pin and supply lines of the faucet in order for you to complete your installation. Vigo brand vanities have two typical styles for the drawer assembly. Vigo offers multiple methods for removal of the drawers. Below are the typical methods to remove the top drawer. UNSCREW OPTION A 1 Pull the drawer out.
PAGE 7
VANITY COMPONENTS LIMITED WARRANTY EFFECTIVE JANUARY 1, 2010 original owner or end-user for personal household use. For commercial uses, additional limitations apply. VIGO warrants the Product to be free from defects in workmanship and materials under normal use and service for a period of five (5) years from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer.