User Manual

ManualsBrandsVigo ManualsFor HomeVG09027K1

DIMENSIONS

FLOOR

34"

59 1/2"

17 3/4"

VANITY SPECIFICATIONS

VANITY COMPONENTS

Model VG09027K1

MODEL # VANITY VANITY VANITY

WIDTH HEIGHT DEPTH

VG09027K1 59 1/2" 34" 17 3/4"

MODEL VG09027K1

FEATURES









PACKING LIST

Vanity Assembly







Sink



TOLL FREE: (866) 591 - 7792

E-Mail: techmail@vigoindustries.com

www.vigoindustries.com

For warranty purposes contact our toll free number:

Summary of content (7 pages)

PAGE 1
VANITY SPECIFICATIONS VANITY COMPONENTS Model VG09027K1 MODEL VG09027K1 FEATURES PACKING LIST Vanity Assembly Sink DIMENSIONS MODEL # VG09027K1 VANITY WIDTH 59 1/2" VANITY HEIGHT 34" VANITY DEPTH 17 3/4" For warranty purposes contact our toll free number: TOLL FREE: (866) 591 - 7792 E-Mail: techmail@vigoindustries.com 17 3/4" 59 1/2" 34" www.vigoindustries.
PAGE 2
DIMENSIONS 20 1/2" 12" 21 1/2" 34" 17 3/4" FLOOR FLOOR SIDE BACK VIEWS VG09027LHK OR VG09027RHK FRONT VIEW 59 1/2" 4 3/8" 34" 8 1/8" FLOOR VG09027K FRONT VIEW 17 3/4" 10" 15" FLOOR SIDE VIEW MIDDLE BACK VIEW NOTE: THIS SHEET SHOWS THE POSSIBLE CONFIGURATIONS FOR THE VG09027 SERIES.
PAGE 3
ROUGHING-IN 20 1/4" 12 5/8" 15" ADJUSTABLE 17 3/4" Open space for Rough-In Plumbing 4 1/2" 10 1/8" 29 3/8" 13 1/8" Should be at the same height as the center of the 2"x6" Backing Material 1 7/8" 3 5/8" 1 7/8" 10" FLOOR SIDE BACK VIEWS FLOOR MIDDLE BACK VIEW NOTE: Vigo reserves the right to change or alter their products or warranty.
PAGE 4
PREPARE SITE NOTE: This is the recommended installation for wall mount and freestanding vanities. NOTE: To properly secure the vanity, the center of the required 2x6 backing material must be the correct height from the floor. This will be your desired height. OPTION A FRONT-NOTCH ADJUSTABLE BASED OFF DESIRED HEIGHT Measure and mark your desired height up from the floor. Make sure to remove the distance of the top of the vanity without the sink to the center on the 2 mounting vanity brackets, 1 7/8".
PAGE 5
PACKAGE CONTENTS ASSEMBLY VANITY BRACKETS -2PC. PLASTIC ANCHOR - 2PC. SCREW - 2PC. 1. Select the side vanity locations models mark holes on the wall for mounting screws. Remove the vanity, drill holes, stick anchors. Place washers to the screws and screw unit to the wall. This should be drilled into your 2"x6" backing material.Place covers to the screws.
PAGE 6
OPTIONAL: STEP 2 OF INSTALLATION INSTRUCTIONS When installing your faucet it is highly recommended to remove the top drawer. This will allow you to have access to the hollow pin and supply lines of the faucet in order for you to complete your installation. Vigo brand vanities have two typical styles for the drawer assembly. Vigo offers multiple methods for removal of the drawers. Below are the typical methods to remove the top drawer. UNSCREW OPTION A 1 Pull the drawer out.
PAGE 7
VANITY COMPONENTS LIMITED WARRANTY EFFECTIVE JANUARY 1, 2010 original owner or end-user for personal household use. For commercial uses, additional limitations apply. VIGO warrants the Product to be free from defects in workmanship and materials under normal use and service for a period of five (5) years from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer.