SINK SPECIFICATIONS DOUBLE BOWL Undermount Model VG3221L FEATURED MODEL VG3221L 9" & 7" BOWL DEPTH FEATURES 18 gauge, stainless steel 304 Nickel - Bearing Content Long-lasting, easy-to-clean, satin finish Sound-deadening insulation Available in right configuration (big bowl is on the right) or left configuration (big bowl is on the left) Rear drain placement 50mm radius corners on big bowl 45mm radius corners on small bowl PACKING LIST - SINK CUT-OUT TEMPLATE MOUNTING HARDWARE NOMINAL DIMENSIONS MODEL #
Installation instructions Undermount Sinks Before you begin: Please carefully read these instructions. Unpack and inspect the sink carefully. Do not install the sink if it is damaged. Save all original packaging and receipts. Check and follow all local plumbing codes. General Recommendations: Read installation and maintenance instructions, thoroughly before installation.
Installation Instructions Please carefully read complete instructions before beginning installation. Only a professional stone fabricator is qualified to perform this installation. Note: These instructions are for installation with solid surface, composite material countertops. Vigo recommends professional countertop installers and is not responsible for damage to the countertop or sink during installation. ! Do not cut the sink opening with traditional saw cut method. 1.
6. Loosely attach mounting brackets to the countertop, parallel to the cutout opening using the supplied mounting screws and nuts. Mounting screws with brass inserts are supplied with the sink, however, countertop material vary and the correct type of fasteners should be recommended by your installer or supplier. 7. Clean sink flange and underside of cutout area of countertop, making sure that the area is smooth and free of grease. MUST use 100% silicone for this installation.
Care and Maintenance ALWAYS preventative cleaning. affect the appearance of your sink. abrasive such as Comet. up over time with a mild solution of vinegar and water followed by a thorough flushing with water. grain. NOT RECOMMENDED FOR MIRROR FINISH. NEVER develop rust spots in the stainless steel surface. finish of your sink. the finish of your sink. sink. Silver cleaners can also contain acids that will damage the sink surface.
KITCHEN SINK LIMITED LIFETIME WARRANTY EFFECTIVE JANUARY 1, 2010 end-user for personal household use. For commercial uses, additional limitations apply. VIGO warrants the Product to be free from defects in workmanship and materials under normal use and service for the period commencing from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer, through the lifetime of the original owner or end-user.
VG3221L VG3221L Acier inoxydable de calibre 18 Contenant du nickel 304 Isolation sonore DIMENSIONS NOMINALES LISTE DES ARTICLES VG3221L - QUINCAILLERIE DE MONTAGE 9" 7" 15 3/4" x 18 3/4" 13" x 16 1/2" 32" x 20 3/4" 18 16 1/2" [420mm] 18 3/4" [475mm] 20 3/4" [526mm] 32" [813mm] 15 3/4" [400mm] 13" [330mm] INDOOR UTILISATION DE CUISINE SEULEMENT. ILS 7" [178mm] 7 1/4" [184mm] 9" [229mm] 9 1/4" [235mm] VUE DE DESSUS VUE DE FACE NATUREL ANNULE AUCUNE GARANTIE SUR CE PRODUIT.
Veuillez lire attentivement les instructions. l'installation.
lors de l'installation. ! comptoir. (FIGURE 2) Comptoir Support fixation Calfeutrage en silicone (non fourni) Dispositif de fixation Figure 1 Support fixation Calfeutrage en silicone (non fourni) Dispositif de fixation Figure 2 au-dessus des orifices de l'armoire et du robinet.
Vous DEVEZ utiliser de la silicone pure pour cette installation. Appliquez une bande continue de calfeutrage en silicone sur le Figure 4 appuyez dessus pour l'enfoncer dans le comptoir.
Entretien TOUJOURS et essuyez-le bien. produit abrasif doux (Comet, par exemple). vinaigre et d'eau, puis rincez minutieusement avec de l'eau. sens du grain. JAMAIS en acier inoxydable.
VIGO INDUSTRIES, LLC ("VIGO") utilisateur final en vue d'un usage personnel domestique. D'autres limitations s'appliquent en cas d'usage commercial. constructeur. tiers. Limitations directement ou indirectement. blessures, voire la mort. constructeur. Limitations commerciales Service de garantie proposition par le client met fin aux obligations de VIGO au titre de la garantie.
ESPECIFICACIONES DEL LAVABO Modelo VG3221L MODELO DESTACADO VG3221L 18 de ancho, acero inoxidable Aislamiento insonorizante CONTENIDOS DEL PAQUETE FREGADERO PLANTILLA DE CORTE DIMENSIONES NOMINALES MODELO NRO. VG3221L DE TAZON PROFUNDIDAD DEL FREGADERO 9" 7" 15 3/4" x 18 3/4" 13" x 16 1/2" EXTERIOR DIM. 32" x 20 3/4" ANCHO 18 16 1/2" [420mm] 18 3/4" [475mm] 20 3/4" [526mm] 32" [813mm] 15 3/4" [400mm] 13" [330mm] NOTA: PARA USO DE COCINA EN INTERIORES.
Antes de comenzar: Lea con detenimiento estas instrucciones. Recomendaciones generales: utilizar las herramientas adecuadas y usar siempre accesorios de seguridad personal para protegerse. Cuidado de por vida lana de acero o trapos abrasivos.
compuesto. Vigo recomienda delegar el trabajo a instaladores profesionales de encimeras y no se hace ! 1. Desempaque el nuevo fregadero y revise el contenido de los materiales suministrados: fregadero, B. Montaje expuesto: el borde del fregadero queda expuesto alrededor 1/4" desde el borde de la apertura de la encimera.
6. Con los tornillos y las tuercas de montaje incluidos, coloque sin ajustar los soportes en la encimera, en paralelo a la apertura del corte. El fregadero viene con tornillos de montaje con injertos de instalador o proveedor deben recomendarle el tipo de tornillos correcto. Figura 4 reborde continuo de calafate de silicona de manera pareja sobre la parte superior del reborde del fregadero. (FIGURA 4) NUNCA lleve a cabo este procedimiento al aire libre y bajo la luz del sol.
Cuidado y Mantenimiento SIEMPRE una mayor limpieza preventiva. Comet. NO SE RECOMIENDA HACERLO EN ACABADOS BRILLANTES. NUNCA acero inoxidable. demasiado largo pues puede arruinar el acabado. tiempo demasiado largo pues pueden arruinar el acabado. la superficie del fregadero.
VIGO INDUSTRIES, LLC ("VIGO") la fecha de compra inicial por parte del propietario/ usuario final, contratista o constructor a VIGO o a un distribuidor autorizado de VIGO y durante toda la vida del propietario o usuario final originales. otras personas. Limitaciones indirecta. propietario/usuario final.