@ Sis E VIGOR INDUSTRIES INSTALLATION GUIDE FOR SHOWER ENCLOSURE (MODEL VG06031) /\ SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols. /A WARNING Instructions that, if ignored, could result in death or serious personal injury caused by incorrect handling or installation of the product. These instructions must be observed for safe installation. /\ CAUTION The instructions for the following unit i
INSTALLATION INSTRUCTIONS FOR SHOWER ENCLOSURE OWNER'S MANUAL PLEASE READ INSTRUCTIONS BEFORE PROCEEDING N\\\ 15 o/ 16 GLASS THICKNESS 5/16" NOTE: INSTALLATION MUST BE DONE BY A QUALIFIED, LICENSED PROFESSIONAL MODEL VG06031 Packing List Wall mount brackets (2pc) Fixed panel holders (2pc) Rollers (4pc) Fixed panel (1pc) Door (1pc) Handle assembly (1pc) Fixed panel bottom clip (1 pc) Bottom door goods (1 pc) Door threshold (1pc) 10. Door stopper (2pc) 11. Structural rail (1pc) 12. Side seal strip (2pc) 13.
1. WALL MOUNT BRACKET ASSEMBLY g 2. FIXED PANEL HOLDER 98026 o 8. ROLLERS T 98020 0 4. FIXED PANEL 97017-38 5. DOOR 27018 6. HANDLE ASSEMBLY 98021 Il -0 14 l_ifl‘l 7. FIXED PANEL BOTTOM cup P 98028 8. BOTTOM DOC GUIDE 98029 Sl 8. DOOR THRESHOLD 95007-36 96007-40 . 10. DOOR STOPPER 98024 11. STRUCTURAL RAIL 12. SIDE SEAL STRIP 13. DOOR SEAL STRIP 14. PHILLIPS SCREW 2' 15. PHILLIPS SCREW 118 mifi 88001 88013 ‘88038 88035 16. PLASTIC ANCHORS 17. PLASTIC ANCHORS 18.
/\ WARNING WE STRONGLY RECOMMEND THAT A LICENSED PROFESSIONAL INSTALL THIS SHOWER CABIN AND INCLUDE THE ASSISTANCE OF A SECOND PERSON TO INSTALL THE DOOR UNIT. INSTALLATION OF THE SHOWER DOORS BY AN INEXPERIENCED PERSON MAY RESULT IN GLASS BREAKAGE AND, CONSEQUENTLY, CAUSE PERSONAL INJURY OR DEATH. BEFORE STARTING Compare items on your invoice with what you have received. Carefully review the Packing List on page 2. If any items are missing contact Virgo Industries at 1-866-581-7792.
STEP 1: INSTALLATION 1. Due to individual site variations, exact guidelines for every situation cannot be supplied. The recommended framing and dimensional requirements shown are for a typical application and may vary depending on the site requirements. 2. Your shower enclosure should be installed in a leveled wall opening. 3. Ensure that there is sufficient structural support behind your shower wall to bare the weight of the door.
‘OUTSIDE OF THE SHOWER TOP VIEW STEP 3: DOOR INSTALLATION 1. Screw top rollers (3) to the door (5), see FIG. 6. 2. Place door (5) to the structural rail (11), see FIG. 7. 3. Screw bottom rollers (3} to the door (5), see FIG. 8. MODEL VG06031 FIG.
OUTSIDE OF THE SHOWER INSIDE OF THE SHOWER TOP VEW FIG.6 ek W STEP 4: THRESHOLD INSTALLATION 1. Seal bottom of end cup with clear silicone. 2. Seal bottom side of the threshold (9) with clear silicone. 3. Slide end cup to the fixed panel (4). Align threshold with the door FIG. 8 and press down firmly.
STEP 5. HANDLE INSTALLATION 1. 2. 3. Unscrew handle holders from the handle (6). Place handle to the position on the door with plastic 0| |washer on each side of the door (FIG. 9) 5 Tighten handle holders from inside of the shower. 6 1 FIG.9 THIS END MUST FIG.
STEP 6: SEAL STRIP INSTALLATION 1. Place seal strip to the door and to the glass, see FIG. 10, page 8. STEP 7: SILICONE. 1. Apply silicone all along the wall and floor on the interior of the shower enclosure. (FIG. 11) NOTE: DO NOT ALLOW DIRECT WATER ONTO DOOR SEAL STRIP. WAIT 24 HOURS BEFORE USING THE SHOWER.
CLEANING INSTRUCTIONS FOR THE SHOWER CABIN AND DOOR PANEL A Sow Use mild liquid household cleaners to keep metal surface bright and clean. Rinse well and dry with a clean cloth. Remove dust with a soft, damp cloth. Use rubbing alcohol to clean and remove grease, oil, paint, and ink. Accidental scratches or stains will rarely show. If they do show, they can be easily removed with a liquid automobile polish. /\ IMPORTANT Do NOT use abrasive cleaners, scrapers, metal brushes, or any items/products that would s
VIGOR INDUSTRIES, LLC ("VIGOR) SHOWER ENCLOSURE LIMITED LIFETIME WARRANTY EFFECTIVE JANUARY 1, 2010 VIGOR offers the following limited warranty on each of its Shower Enclosure products* (the “Product”) and the components thereof. This warranty extends only to the original owner or end-user for personal household use. For commercial uses, additional imitations apply.