Installation Guide

MODEL VG06043
11
6. Untighten the plates from the wall mount
brackets and center the plates to the wall
markings. When installing, the center
dimension of the wall mount bracket plate
to the curb is *76 1/2" for the shower door
model and *55 3/4" for the tub door model
and the center dimension of the wall mount
bracket plate to the center of the vertical
rail is 7/8".
*NOTE: The measurements of 55 3/4",
76 1/2" and 7/8" should just be used as
a guide. Your actual dimension may
vary.
7. Install the plate by drilling holes at your
markings and place the white plastic
anchors (#16) inside them. Replace the
plates and screw them into the plastic
anchors with the hex screws (#19).
Preferred method of installation
negates anchors and has the installation
going right into the studs.
B6
B7
*55 3/4" or *76 1/2"
PLATE
PLATE
This distance, 7/8", is from the center
of the vertical rail to the center of the
plate. This distance will be the same
at the fixed panel holder as it is at the
wall mount assembly. This will
ensure that the door will function
properly.
7/8"
!
PLATE
19
16
19
PLATE
16