Installation Guide

MODEL VG06043
16
2. Remove the threshold. Apply silicone to the
underside of the threshold. Place the
threshold back into its shower base location.
Align the threshold and press firmly down.
Apply silicone to the threshold around the
inside and outside of the shower base.
Remove any excess silicone from the
threshold.
8
D2
E1
E2
6
6
5
E. INSTALLING THE HANDLE
1. Unscrew the handle holders from the handle
assembly (#6).
2. Place the handle to the position on the door.
Place plastic washers (supplied) on each
side of the door.