Installation Guide

MODEL VG06043
13
C. INSTALLING THE DOOR
1. Remove the rollers (#3) from the box,
note that these are fully installed.
Carefully unthread the cap with a small
head allen key. You will see a big hex
screw, this is referred to as the roller
height adjustment screw.
2. Use the provided allen key to unscrew
the adjustment screw and dismantle
the roller. Place the screw through
door panel top holes and attach the
two top rollers onto the door panel
(#5).
3. Attach seal strip (#11) to both sides of
the door panel.
Start at the bottom and
work your way up, using the heel of
your hand to firmly press the seal strip
onto the glass.
ROLLER (3)
SMALL HEX
HOLE
3/8" VARIANCE
ROLLER HEIGHT
ADJUSTMENT
SCREW
ROLLER HEIGHT
ADJUSTMENT
SCREW
OUTSIDE OF
THE SHOWER
ROLLER (3)
SMALL HEX
HOLE
ROLLER HEIGHT
ADJUSTMENT
SCREW
5
5
11
C1
C2
C3