Installation Guide

IMPORTANT

 Verify that the overall size of the shower door opening is appropriate for the shower enclosure.

 Due to individual site variations, exact guidelines for every situation cannot be supplied. The

recommended framing and dimensional requirements are shown for a typical application and

may vary depending on the site requirements.

 To prevent damage to the finish, you should protect the shower cabin bottom with a cardboard

protector before beginning the installation.

 Ensure that there is sufficient structural support behind

the shower wall to hold the weight of the shower door. If

there is insufficient enough support, then reinforce the

shower walls with wooden studs prior to shower door

installation. [SEE FIG. 1]

STUDS

FIG.1



MODEL VG06043

INSTALLATION STEPS

A. INSTALLING THE VERTICAL RAIL / FIXED PANEL

1. Place the door panel (#5) into the shower

first making sure to rest the glass in a manner

that the glass or base/tub does not incur

damage. Make sure you have the door

facing right side up before proceeding.

DOOR PANEL

(#5) INSIDE OF

THE SHOWER