Use and Care Manual

MODEL VG06046
6
A2
A3
2. Measure *70.87" and 71.85" from the floor
or curb of base. Mark these locations.
These measurements will be the center of
each hole in your wall mount bracket
assembly plate (#2).
3. Place the structural rail (#4) into the cabin
opening. Make sure that the wall mount
brackets (#2) are assembled on the rail
before doing this. Make sure the structural
rail is level. Mark the location of the wall
mount brackets (#2) on the wall.
71.85"
The dimension supplied
is measured at the center
of the wall mount bracket.
4
2
70.87"
71.85"
70.87"
71.85"
70.87"