Installation Guide

12
MODEL VG6048
5. Clean the door (#14) glass surfaces where
the magnetic seal strip (#8) is to be
installed with rubbing alcohol. Place the
magnetic seal strip (#8) to the door panel.
The magnetic side should be facing the
inside and the clear side be facing the
outside. Do not install the handle first,
this is dangerous and may cause the
glass to break. The door magnetic seal
strip (#8) is reversible and will need to be
cut at top for best aesthetic approach.
C5
!
VIEW FROM
INSIDE
14
8
D. INSTALLING THE VERTICAL RAIL
1. Clean the vertical rail (#20) with rubbing
alcohol. Place the magnetic seal strip (#8)
on the vertical rail (#20). The magnetic
side should be facing the outside and the
clear side be facing the inside. The door
magnetic seal strip (#8) is reversible and
will need to be cut at top for best aesthetic
approach.
D1
20
8