Installation Guide

15
MODEL VG6048
6. Replace the vertical rail (#20) and
screw into the wall with 1 1/8" phillips
screws (#23).
D6
7. Replace the magnetic seal strip (#8) back
onto the vertical rail (#20).
Note: The position of the magnetic seal
strip (#8) may need to change once you
install the threshold in Step G. The
magnetic seal strip must rest on the
right threshold clip (#18).
20
23
D7
20
8
3/8"
[10mm]
MAKE SURE TO
LEAVE A GAP OF
3/8" [10MM] FROM
THE BOTTOM OF
THE VERTICAL
RAIL