Installation Guide

18
MODEL VG6048
6. Place the wall connector (#9) onto the plate
and slide the structural arm (#6) into the
wall connector. Slide the other side of the
structural arm (#6) into the support
assembly (#17) on the side panel. Tighten
all set screws.
F. INSTALLING THE HANDLE
1. Assemble the door handle (#15) to the door
(#14). Place the outside handle on the
outside of the door and the inside handle on
the inside, making sure to have a clear
gasket between each handle and the glass.
From the inside, screw the handles together
with the provided screw.
E6
F1
SIDE PANEL
WALL
17
9
6
DOOR
PANEL
INSIDE
HANDLE
SCREW
CLEAR
WASHER
CLEAR TUBE
OUTSIDE
HANDLE
CLEAR
WASHER
10mm
COVER