Installation Guide

5
FIG.1
PREPARATION STEPS TO FOLLOW BEFORE INSTALLATION
CAUTION
!
 GASKETS NEED TO BE IN BETWEEN ALL GLASS AND METAL CONTACT. FAILURE TO
DO SO CAN LEAD TO BREAKAGE AND POTENTIAL BODILY HARM.
LEFT DOOR INSTALLATION
RIGHT DOOR INSTALLATION
MODEL VG6048
IMPORTANT
 Verify that the overall size of the shower door opening is appropriate for the shower enclosure.
 Due to individual site variations, exact guidelines for every situation cannot be supplied. The
recommended framing and dimensional requirements are shown for a typical application and
may vary depending on the site requirements.
 To prevent damage to the finish, you should protect the shower cabin bottom with a cardboard
protector before beginning the installation.
 Properly apply silicone to the wall and base joints.
 Make sure to read corresponding base instructions carefully prior to install on the Vigo Brand
Shower Door System. Failure to do so can cause water leakage and bodily harm.
 Ensure that there is sufficient structural support behind the shower wall to hold the weight of the
shower door. If there is insufficient enough support, then reinforce the shower walls with wooden
studs prior to shower door installation. [SEE FIG. 1]
STUDS

