Installation Guide

6
MODEL VG6048
INSTALLATION STEPS
A1
A2
A. INSTALLING THE SIDE GLASS PANEL
1. Arrange the side glass panel (#10) to the
preferred configuration to determine the
orientation of glass supports (#3). Clean
the side glass panel (#10) edge where the
side seal strip (#4) is to be installed with
rubbing alcohol. Install the side seal strip
(#4) to the wall side of the side glass panel.
2. Screw in the glass supports (#3) with the
hex key to the side glass panel (#10). Be
sure to use washers on both sides of the
panel.
3. Mark holes on the wall for the mounting
screws after leveling panel.
4
10
WALL
SIDE
THIN
GASKETS
10
3
A3
10
3