Installation Guide

8
MODEL VG6048
6. Position the left threshold clip (#19) at the
bottom of the side panel (#10). Mark the
location for the mounting hole.
7. Remove the left threshold clip (#19). Drill a
hole into the respective mark and put a
plastic anchor (#12) in it. Not necessary
if installing into studs. Studs are the
preferred means of installation, anchors
can pull out of the wall causing property
damage and bodily harm.
8.
Replace the left threshold (#19) to the
proper position. Screw it into the floor with
3/4" screws (#16).
A6
10
19
A7
10
!
12
A8
16
19
10
12