Installation Guide

9
MODEL VG6048
B2
THIN
GASKETS
VIEW FROM
INSIDE
SIDE
GLASS
PANEL (10)
HINGE (7)
INSIDE VIEW
SIDE
GLASS
PANEL (10)
CLEAR
PVC SHIM
HINGE (7)
SIDE
GLASS
PANEL (10)
CLEAR
PVC SHIM
INSIDE VIEW
HINGE (7)
B. INSTALLING THE HINGE
1. Clean the glass surface on the side glass
panel (#10) where the hinges (#7) are to be
installed with rubbing alcohol. Place gaskets
on each side of the side glass panel (#10).
Position hinges on the side glass panel (#10)
as shown. Place a shim(s) as needed
between the glass and the hinge on the
bottom. The metal should not rest on the
glass. There is a 1 inch horizontal
adjustment built into the hinges for minor
modifications.
2. Screw the hinges (#7) to the side glass panel
(#10) with the hex key (supplied).
B1
1" adjustment