Installation Guide

MODEL VG06051
16
C1
C. INSTALLING THE SMALL FRONT FIXED PANEL
1. Align the small front fixed panel (#5) to the
shower opening. Make sure you place the
panel with the holes closer to the corner.
The difference is minimal so stop to measure
as needed.
2. Unscrew the corner brackets (#8). Align the
corner brackets to their respective positions
from inside the shower. Place the corner
plates on the outside of the shower. Screw
in the corner plates to the corner brackets
with the provided screw from inside the
shower. The side seal strip (#18) will be firmly
compressed between the small front fixed
panel (#5) and the side glass panel (#6).
This is to prevent water leakage.
5
C2
8
PLATE
CORNER
BRACKET
8
1 7/16"1 11/16"
5
7
7