Installation Guide

MODEL VG06051
18
ROLLER (3)
SMALL HEX
HOLE
3/8" VARIANCE
ROLLER HEIGHT
ADJUSTMENT
SCREW
ROLLER HEIGHT
ADJUSTMENT
SCREW
OUTSIDE OF
THE SHOWER
ROLLER (3)
SMALL HEX
HOLE
ROLLER HEIGHT
ADJUSTMENT
SCREW
E2
E. INSTALLING THE DOOR
1. Remove the rollers (#3) from the box, note
that these are fully installed. Carefully
unthread the cap with a small head allen
key. You will see a big hex screw, this is
referred to as the roller height adjustment
screw.
2. Use the provided allen key to unscrew the
adjustment screw and dismantle the roller.
Place the screw through door panel top
holes and attach the two top rollers onto the
door panel (#7).
E1