Installation Guide

STUDS



FIG.2

Verify that the overall size of the shower door opening is appropriate for the shower enclosure.

Because of the hole locations on the structural rail, do not cut the structural rail.

IMPORTANT

Due to individual site variations, exact guidelines for every situation

cannot be supplied. The recommended framing and dimensional

requirements are shown for a typical application and may vary depending

on the site requirements.

To prevent damage to the finish, you should protect the shower cabin

bottom with a cardboard protector before beginning the installation.

Ensure that there is sufficient structural support behind the shower wall to

hold the weight of the shower door. If there is insufficient enough support,

then reinforce the shower walls with wooden studs prior to shower door

installation. [SEE FIG.2]

MODEL VG06051