Warranty Guide

13
10
15
13
10
13
OUTSIDE OF
THE CABIN
INSIDE OF
THE CABIN
10
15
15
22
MODEL VG06062
H1
H. INSTALLING PRE-CUT BOTTOM DOOR SEAL STRIP
1. Clean the door glass panel (#13) edge where the
door bottom side seal strip (#15) is to be installed
with rubbing alcohol. Verify that the soft flange of
the seal strip faces toward the inside of the shower
cabin before seal strip installation. Install the seal
strip according to the diagram. NOTE: If the
seal strip is not flat or twisted, use hot
water and a hair dryer to apply minimal
heat and press the seal strip back into
position.