Use and Care Manual

MODEL VG06064
23
14
8
11
14
8
14
OUTSIDE OF
THE CABIN
INSIDE OF
THE CABIN
8
11
11
H1
H. INSTALLING BOTTOM DOOR SEAL STRIP
1. Clean the door glass panel (#14) edge where
the door bottom side seal strip (#11) is to be
installed with rubbing alcohol. Verify that the
soft flange of the seal strip faces toward the
inside of the shower cabin before seal strip
installation. Install the seal strip according to
the diagram. NOTE: If the seal strip is
not flat or twisted, use hot water and
a hair dryer to apply minimal heat and
press the seal strip back into position.
5
11
14
5
5