User Manual

BSS C ONFIGURATION AND U SER G UIDE

In addition, you can perform these actions on BTS:

• Disconnect: This means that BTS is not connected to

BSC as the BTS link access protocol-channel D (LAPD)

link is down.

• Connect: This means that BTS is connected to the BSC.

• Reset BTS: This is used to restart/reset the BTS.

Follow these steps to set any of the above state or perform

any action on BTS:

1. Open the BSS node in the modify mode.

2. Expand BTS-IF, right-click the desired BTS, and click

Actions.

3. Click the desired option.

Here, as an example, the dialog-box corresponding to

Unlock is shown.

4. Click Ok to set the state of the BTS.

6.5.3 Viewing BTS Configuration Data

You can view the BTS configuration details and can change

the value of Satellite Flag field.

Follow these steps to view the BTS configuration data:

1. Open the BSS node in the modify mode.

2. Expand BTS-IF and click the desired BTS :<IP address>.

3. Click the Configuration Data tab.

LNote: You can select appropriate value for the Satellite

Flag field.