User Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 120 Commercial in Confidence © VNL

Field Name Description Values

Operational Status filed is

enabled.

LNote: The data present in the GB Interface tabbed page

is preconfigured and is read from the BSS.

7.3.2 Modifying Gb Interface Details

You must lock the GB Interface to modify it. You can modify

the details in the GB Interface tab by following the below

steps:

1. Open the BSS node in the modify mode.

2. Expand StackConfig and click GB Interface.

3. Change the values in the required field and click Modify.

LNote: You cannot delete the details in the GB Interface

tabbed page.

7.3.3 Configuring FR

FR is a common protocol that is used in many packet-

switched networks.

This section explains the procedure of adding, modifying,

and deleting FRLink and network service virtual connection

(NSVC) in a BSS node.

7.3.3.1 Adding FRLink

You can add an FRLink by following the below steps:

1. Open the BSS node in the modify mode.

2. Expand StackConfig, right-click GB Interface, and click

Add FR.