User Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 22 Commercial in Confidence © VNL

3. Managing the BSS Node

This section describes the procedure to add the BSS node

in OMC. In addition, this section describes the different

modes for viewing the BSS node and configuration of

trunkport.

3.1 Adding a BSS Node

The addition of BSS node in OMC is a two-step process:

1. The registration of BSS node with the OMC server.

2. Assigning the BSS node to hierarchy.

Registration is an automatic process that BSS node initiates.

The BSS node appears in the unAssigned hierarchy on

completion of the registration process. You need to assign

the BSS node to another hierarchy. This process or

approach of adding BSS node is also called bottom-up

approach.

You can configure the BSS node only after assigning the

node to another hierarchy from unAssigned hierarchy.

LNote: For more information on hierarchies, please refer to

“OMC Add Remove NE Import Export Guide-Managing

Hierarchies”.

Refer “Approaches for Adding BSS Node” to know the

different approaches for adding the BSS node.