User Manual
BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 91
Field Name Description Values
incrStepSizeP
Max Rx Lev UL - Min Rx Lev UL >
safetyMarginP
Min Rx Qual
UL
Refers to the threshold that defines lowest
acceptable quality measured on the uplink.
If the BTS/TRX reports a lower quality, the
uplink power is increased.
• 0: BER < 0.2 %
• 1: 0.2 % < BER < 0.4 %
• 2: 0.4 % < BER < 0.8 %
• 3: 0.8 % < BER < 1.6 %
• 4: 1.6 % < BER < 3.2 %
• 5: 3.2 % < BER < 6.4 %
• 6: 6.4 % < BER < 12.8 %
• 7: 12.8 % < BER
Consistency Conditions:
Min Rx Qual UL > Max Rx Qual UL
Min Rx Qual Lev UL HO > Min Rx Qual UL
0 to 7
Max Rx Qual
UL
Refers to the threshold that defines good
quality measured on the uplink.
If the BTS/TRX reports a better quality, the
uplink power is reduced.
• 0: BER < 0.2 %
• 1: 0.2 % < BER < 0.4 %
0 to 7