User's Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 110 Commercial in Confidence © VNL

7.2 Configuring Cell Level GPRS Data

You can add, modify, or delete the fields of this ME only

when the administrative state of the cell is locked. The

subsequent sections explain the procedure of adding,

modifying, and deleting GRPS details in the BSS.

7.2.1 Adding Cell Level GPRS Data

Follow the below steps to add GPRS details:

1. Open the BSS node in the modify mode.

2. Expand RadioConfig, expand LAC, expand LAC: <IP

address>, and click CELL: <IP address>.

3. Click GPRS Data tab and click Add.

The Configuration – Add Row dialog box appears.

The various fields in the Configuration – Add Row dialog box

are explained below:

Table 28: Fields in GPRS Configuration Dialog Box

Field Description Values

Lac ID Indicates the location

area code. This value

should be same as

defined for the

corresponding CS cell in

“Table 19”. This is a read-

only field.

1 to

65533,

65535

Cell ID Indicates the cell ID. This

value should be same as

defined for the

0 to

65535