User's Manual

BSS C ONFIGURATION AND U SER G UIDE

Table 18: LAC Fields

Field Name Description Values

LAC Indicates the location

area code.

1 to 65533,

65535

4. Click Ok to add the new LAC.

As shown in the figure given below the LAC has no data to

modify, it has only index value that cannot be modified.

Similarly, you can delete a LAC by clicking Delete in the

LAC tab.

6.4 Configuring Cell

Cell is the unit of radio coverage area. You can add, modify,

or delete the fields of this ME only when the administrative

state of the cell is locked. The administrative state of cell, by

default, is locked when it is added to BSS. You should

configure handover and power control parameters after

adding a cell because unlocking a cell requires configuration

of these parameters.

LNote: If you have not configured the handover and power

control parameters and you try to unlock the cell then OMC

gives a generic error message that consistency check has

failed.

6.4.1 Adding Cell

A LAC can have more than one cell and one cell can have

many channel groups.

Follow the below steps to add cell element:

1. Open the BSS node in the modify mode.