User Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 104 Commercial in Confidence © VNL

6.5.4 Adding TRX

You can add the same number of TRX that you have

specified during the addition of BTS. If you have not

specified any TRX for a BTS then you cannot add any TRX

for the BTS. In addition, you cannot modify the Number of

Trx field of BTS after the addition of BTS. Therefore, you

can only add the number of TRX as specified in BTS

configuration.

Follow these steps to add a TRX:

1. Open the BSS node in the modify mode.

2. Expand BTS-IF, right-click BTS :<IP address>, and

select Add Element.

3. In the Add TRX dialog box, select TRX as ME type and

click Ok.

The Configuration – Add Row dialog box appears.

LNote: You may receive an error that no more rows can be

added because the maximum number of TRX that can be

added in BTS should not exceed the value specified in the

Number of TRX field in BTS configuration window.

The configurable fields for TRX configuration are described

in the following table:

Table 26: TRX Fields

Field Name Description Values

BTS ID Indicates the BTS ID. 0 to 4294967294

Ptrx ID Indicates the physical TRX ID. 1 to 40

Admin State Indicates the administrative status of locked/unlocked