User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 105
Field Name Description Values
the TRX. This is a read-only field.
TRX Location Defines the location of TRX whether
in the frame or with R2 BTS. This is a
read-only field.
r2_BTS
Antenna lD Antenna identifier for association of
TRX with a cell.
0 to 4294967295
TRX Position Specifies the position of the TRX
within a BTS.
1 to 2
RF PathGain Adds all positive and negative
attenuation gains.
-32768 to 32767
4. Provide the values in the given fields and click Ok.
6.5.5 View TRX Configuration Data
You can view the configuration data, status, traffic, and
TimeSlot usage of a TRX that you have added. Follow these
steps to view the details:
1. Open the BSS node in the modify mode.
2. Expand BTS-IF, expand BTS :<IP address>, click TRX,
and click TRX :<IP address>.
3. Click the TRX tab in the right-pane.
The right-pane shows the configuration, status, traffic, and
timeslot usage of TRX in the TRX tab in the Configuration,
Status, Traffic, and TimeSlot usage panel respectively. You
can edit the Antenna ID and RF PathGain fields.