User Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 116 Commercial in Confidence © VNL

7.2.4 Deleting Cell Level GPRS Data

Follow the below steps to delete the details in the GPRS

Data tabbed page:

1. Open the BSS node in the modify mode.

2. Expand RadioConfig, expand LAC, expand LAC: <IP

address>, and click CELL: <IP address>.

3. Click GPRS Data tab and click Delete.

This deletes the details in the GPRS Data tabbed page.

7.3 Configuring Gb Interface

The Gb interface exists between the BSS and serving

GPRS support node (SGSN) in a GPRS network. The

transmission protocols that can be used on this interface are

frame relay (FR) or IP.

This section explains the procedure of configuring the two

protocols within the Gb interface.

7.3.1 Viewing Gb Interface Details

You view the details of the various fields in the GB Interface

tab in OMC by following the below steps:

1. Open the BSS node in the modify mode.

2. Expand StackConfig and click GB Interface.

The GB Interface tabbed page appears in the right pane.

The following table explains the various fields in the GB

Interface tabbed page: