User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 125
2. Expand StackConfig, right-click GB Interface, and click
Add LEP.
The Configuration – Add Row dialog box appears.
The various fields are explained below:
Table 32: LEP Configuration Fields
Field Name Description Values
LEP Indicates the local IP
address used over the Gb
link.
LNote: Currently, only
IPv4 addresses are
supported.
(IP address
x.x.x.x)
LEP Port Indicates the local port
number used for Gb IP
interface communication.
1024 to 65535
signallingWt Indicates the weight
attached to this LEP for
load sharing of the
signaling traffic among
multiple such LEPs.
0 to 255
datWt Indicates the weight
attached to this LEP for
load sharing of the data
among multiple such LEPS.
0 to 255
3. Provide valid values in the fields and click Ok.