User Manual

BSS C ONFIGURATION AND U SER G UIDE

8.2 Configuring the CBS Server

You need to configure the CBS server before sending any

message to MS. You can use an internal or external CBS

server.

8.2.1 Configuring the Internal CBS Server

You can use the internal CBS server, which means that

OMC server is acting as CBS server.

Follow the below steps to configure the internal CBS server.

1. Open Cell Broadcast Service window.

2. Click CBS and click Configuration.

Refer “



Error! Reference source not found.”.

3. In the Configuration tab, select the OMC – CBS check

box.

4. Click OK to save the changes.

The message for successul configuration is displayed in the

Cell Broadcast Service window.

8.2.2 Configuring the External CBS Server

You can configure an external CBS server from OMC. You

should know the IP address and port number to access the

external server. In addition, you should know the username,

password, and keys to authorize your identity to the external

server.

Follow the below steps to configure an external server:

1. Open Cell Broadcast Service window.

2. Click CBS and click Configuration.