User Manual

BSS C ONFIGURATION AND U SER G UIDE

2. Click CBS and click Report.

The CB REPORT tab of the CBS window shows all the

messages that are in the broadcasting process.

3. Click KILL to stop the broadcasting of a message.

4. Close the CBS window to exit from the CBS application.

8.4 Broadcasting Cell Information

You can broadcast the information of a cell to mobile

stations. The broadcasting of cell information displays the

location of the cell in the mobiles of the mobile subscribers.

You should remember these points before sending a cell

information message:

• The value of CBCH field in the channel group table

(please refer “Table 24”) should be true.

• Cell name or cell info for that cell should not be empty

while configuring the cell, by default 0 is the value filled

by OMC.

• There should not be any message already sent on the

cell. This is not applicable for write replace message

type.

You can select a LAC and specific cells of the selected LAC

to send the cell information message.

Follow the below steps to broadcast cell information

message:

1. Open Cell Broadcast Service window.

2. Click CBS, select Cell Info Display and click Cell Info

Display Message.