User Manual

BSS C ONFIGURATION AND U SER G UIDE
Page 138 Commercial in Confidence © VNL
®
2010-2011, All rights reserved
The CELL INFO DISPLAY MESSAGE tab of the CBS
window shows the configuration settings of the cell
information broadcast message.
3. Select the LAC from the LAC drop-down list.
4. Type message code in the Message Code text box.
Check 3GPP specification for the message code that you
want to broadcast.
5. In the Cell ID list, check the cell ids to which you want to
broadcast the message.
6. Click Send.
The confirmation message for the successful broadcasting
of the message appears.
7. Close the CBS window to close the CBS application.
8.4.1 Stopping Cell Information Message
You can stop the cell information message at any time. You
can select specific cells or all cells in a LAC such that the
message is not broadcast in the selected cell.
Follow the below steps to stop cell information broadcast
message:
1. Open Cell Broadcast Service window.
2. Click CBS, select Cell Info Display, and click Cell Info
Display Report.
The CELL INFO DISPLAY REPORT tab shows the status of
the cell information broadcast message.
3. Check the cell ids of the cells in which you want to stop
the cell information message.