User Manual

BSS C ONFIGURATION AND U SER G UIDE

Page 26 Commercial in Confidence © VNL

2. Right-click a node, select Modify Node, and click Node

Configuration.

The Configuration – Modify Node window appears.

3. Double-click BSS:<IP address> to view the MEs.

3.3 Configuring Trunkport

A trunkport is an entity that connects switching centers or

nodes in a communication network and handles many

signals simultaneously. Trunkport facilitates the

communication between any two network nodes (such as

MSC-BSC, BSC-BTS, and so on) over E1. This section

explains how you can configure trunkports.

3.3.1 Viewing Trunkport Details

Perform the following to view trunkport configuration:

1. Open the BSS node in the modify mode.

2. Expand Inventory, expand Hardware, and click Chassis.

The following table provides the details of the fields in the

TrunkPort Config tabbed page:

Table 3: Fields in TrunkPort Config Tab

Name Description Values

TrunkPorts

T0 to T39 Specifies the

various

trunkports.

• T0 to T7

associate with

the ICC card.

• T8 to T39