User Manual

BSS C ONFIGURATION AND U SER G UIDE
© VNL
®
2010-2011, All rights reserved Commercial in Confidence Page 33
4. BSC Configuration
This section explains the procedure of adding BSC node
and configuring timers. It also describes how you can
perform modifications on the BSC node.
4.1 Adding BSC
You can add only one BSC for a BSS node.
Perform the following steps to add a BSC:
1. Open the BSS node in the modify mode.
2. Right-click the root node and click Add Element.
3. Select BSC from the ME Type drop-down list and click
Ok.
The Configuration - Add Row dialog box appears.
The following table describes the configurable fields of the
Configuration – Add Row dialog box for BSC:
Table 4: BSC Add Row Field Values
Name Description Values
Bsc ID Indicates the BSC Id. 0 to 65535
Admin State Indicates the administrative state of the
BSC. This is a read-only field.
locked/unlock
ed
BSC Reset Indicates the flag whether the BSS can
be rebooted or not. It allows you to
reboot the BSS.
If this parameter is set to true, then
no_Reset/acti
ve_ICC_Card
_Active/Stand
by_ICC_Card